| FS 1006 | |
| Overall Height | 313 mm (12.323 in) |
| Largest OD | 116.2 mm (4.575 in) |
| Seam OD | 120.29 mm (4.736 in) |
| Gasket OD | 111.4 mm (4.386 in) |
| GASKET INSIDE DIAMETER | 98.2 mm (3.866 in) |
| Thread Size | 1 1/4-12 UNS-2B |
| EMULSIFIED WATER SEPARATION | 95 % (95 %) |
| FREE WATER SEPARATION | 95 % (95 %) |
| Standpipe | YES |
| EFFICIENCY, TWA BY SAE J 1985 | 98.7 % (98.7 %) |
| MICRON RATING BY SAE J 1985 | 10 micron (10 micron) |
| Primary Applications | ||
| CUMMINS | 3089916 | All Applications |
| CUMMINS | 4095189 | |
| KOMATSU | 6003113110 | |
| KOMATSU | 6003113111 | |
| KOMATSU | 6003117550 | |
| Product Comments | ||
| Recommended for Cummins V28, KV38, and KV50 engines Stratapore Media | ||
| Upgrade Of | ||
| FS1216 | – | |
| IS AN ELEMENT FOR | ||
| FH21402 | – | |
| For Upgrade, Use | ||
| FS19870 | – | |
| Filter Used With | ||
| 3302367S | – | |
| Product Type | Genset |
|---|---|
| Filter Type | Fuel Filter |
QR Code
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-1
-
-
AF27993NF Air Filter
د.إ0.000Availability: In stockOut of stock
Features:
■ Nanofibre filter media provides the highest possible engine protection efficiency without compromising filter life
■ Pleat geometry, spacing and stabilization yields maximum filter performance and long life for lower equipment operating costs
■ Proven radial air filter seal ensures reliable fit in the SSG air housing and easy service events
■ Complete Fleetguard system solution including the AF27994 secondary filter and the SP1307 housing service cover -
WF 2073 Water Filter
د.إ0.000Availability: In stockOut of stock
WF2073
Media Type: Cellulose 60 23
Micron Rating: 60
Coolant Additive: 23 Units
Overall Height inch (mm): 5.43 (137.92)
Thread Size: 11/16-16 UN- 2B -
-
-
-
-
CMM Model
د.إ0.000Availability: In stockOut of stock
- Heating Fluid: Engine coolant (50% glycol/50% water)
- Power: 12 – 24kW
- Rated Voltage: 400V/50Hz/3ph, 440V/60Hz/3ph, 690V/50&60Hz/3ph
- Temperature Controller: Adjustable 32°-212°F (0°-100°C)
- Temperature Setting: 120°F (50°C)
- High Limit Temperature Control: Adj. 32°-212°F (0°-100°C)
- High Limit Temperature Setting: 195°F (90°C)
- Fluid Capacity: 0.8 gal (3.0L)
- Pump Power: 0.5Hp (0.37kW)
-
WL Model
د.إ0.000Availability: In stockOut of stock
HOTSTART tank style engine heaters were developed to pre-heat diesel and gas engines for stationary land power, heavy duty mobile equipment, marine and offshore equipment.
Reviews
There are no reviews yet.